Metrohm 784 KFP Titrino - Manual (Page 34)

2.10 Data output
784 KFP Titrino
31
2.10 Data output
2.10.1 Reports for the output at the end of a determination
With , the report sequence at the end of the
determination is defined.
The entries are specific to the method and are stored in
the method memory.
report:
Definition of report blocks to be printed automatically at
the end of the determination.
The display texts of the Titrino are shown on the left
side. The values are the default values.
>report
report COM1:
report COM1:full;curve
Report sequence
Report sequence for COM1:
full, short, mplist, curve, scalc full, scalc srt, param,
calc, ff
Select a block using the keys < ← > and < → >. If you
require more than one report block, set a ";" as a
delimiter between the blocks.
Identical for COM2.
Meaning of the report blocks:
param Parameter report.
full Full result report with raw results, calculations and statistics.
short Short result report with calculations and statistics.
mplist Measuring point list.
curve Curve volume vs. time
scalc full Full report of silo calculations.
scalc srt Short report of silo calculations.
calc Report with formulas and operands.
ff Form feed on printer.
DEF
(
2
def
>formula
>silo calculations
>common variables
>report
>mean