Metrohm 784 KFP Titrino - Manual (Page 121)

5.1 Setting up and connecting the instruments
784 KFP Titrino
118
5.1.7 Connection of a computer
Preselections on the Titrino:
RS232 settings: ..........................................depend on the control program of the computer
Send to: .............................................................................................................................. IBM
Vesuv 3.0, PC program for data acquisition and method backup
for up to 64 devices ........................................................................................ 6.6008.200
for 2 devices.................................................................................................... 6.6008.500
5.1.8 Connection of a Remote Box
A barcode reader and/or a PC keyboard can be connected to 6.2148.000 Remote Box.
The barcode reader and PC keyboard are used as input aids.
Only plug in and unplug the Remote Box when the Titrino is switched off! The Remote
Box is screwed onto the "Remote" socket of the Titrino. The remote lines of the Titrino are
then accessible at the "Remote" socket of the Remote Box.
5.1.8.1 Connecting a barcode reader
Barcode readers with a 5-pole DIN plug can be connected to 6.2148.000 Remote Box. A
precondition is that the barcode reader can emulate a PC keyboard. If a barcode reader
and a PC keyboard are to be connected at the same time then the barcode reader must
have a T-connection plug. The PC keyboard will then be plugged into this barcode reader
connection.
6.2134.040 Cable (9/9 poles)
or
6.2125.010+6.2125.060 Cables (9/25 poles)
PC
C
B A
D
784