beautypg.com

Metrohm 781 pH/Ion Meter User Manual

Page 44

background image

4.3 All key functions at a glance

34

780/781 pH/Ion Meter, Manual

Key

Measured value display

(normal operation)

Menu display

(editing)

Section 5.2), the key
prints out the measured value as a
measuring point report.

MODE

Operating mode selection

•

In the pH, T and U modes (780 pH

Meter) and the pH, T, U and Conc
modes (781 pH/Ion Meter) the
key changes the mode.

Cancels sequence

•

With the key working se-

quences are terminated without direct
transfer of the data.

QUIT

Message acknowledgement

•

Displayed messages are normally

acknowledged with . (Excep-
tions: see Section 8.2)

•

If cause of the message has not been

remedied then it will appear again at
the next check.

Cancels working step

•

Queries are exited with . In

this way it possible, e.g. to skip individ-
ual steps within a working sequence
without accepting the data.

•

In menus causes a jump to

the next higher level.

CAL.DATA

7

Displays calibration data

•

In the pH and Conc(direct) modes the

key shows the current
calibration data.

Report selection

•

Direct selection of the configuration

report after .

Enters the number '7'

USER

8

User selection

•

With a user name can be

newly entered, selected or deleted.

Enters the number '8'

REPORT

9

Report selection and printout

•

With a report can be

selected and printed out.

•

The selection of the report from those

available is made either with