Metrohm 781 pH/Ion Meter - Manual (Page 115)

7 Various functions
780/781 pH/Ion Meter, Manual
105
7.2.8 Measured values memory report
In the direct types of measurement you can store up to 100 measured
values with (see Section 7.3). If you want to print out all the
stored data then you can produce a measured values stored report:
'mw
781 pH/Ion Meter 01104 5.781.0020
date 2004-06-03 13:55:20
#1
pH 7.254
temp. (Pt1000) 20.1 °C
id1 smpl. 1-1
date 2004-06-03 13:54:10
method pH Demo
#2
pH 6.923
temp. (Pt1000) 20.1 °C
id1 smpl. 1-2
date 2004-06-03 13:54:22
method pH Demo
#3
pH 6.575
temp. (Pt1000) 20.1 °C
id1 smpl. 1-3
date 2004-06-03 13:54:36
method pH Demo
--------------
The entries for id1, id2, user and method will only be included in the re-
port if they contain data.
Please note that this is a simple and rapid method of producing meas-
ured values with their most important data. For the complete documen-
tation of measured value results in the sense of the normal quality as-
surance requirements you should select the automatic measuring point
report instead.
REPORT
9
+
RECALL
6