Metrohm tiamo 2.1 Manual - Manual (Page 808)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
794 ￭￭￭￭￭￭￭￭ tiamo 2.1
Extraction time
The titration is not stopped until the extraction time has elapsed (even when
the EP has already been reached). The entry of an extraction time may be
advisable, e.g. for the titration of sparingly soluble samples.
Range 0 ... 999999 s
Default value 0 s
Temperature
Manually entered titration temperature.
Range -20.0 ... 150.0 °C
Default value 25.0 °C
Time interval measuring point
Time interval for entering a measuring point in the measuring point list.
Range 0.1 ... 999999.0 s
Default value 2.0 s
5.6.3.7.6 BRC - Stop conditions
Tab: Method ▶ BRC ▶ Properties... ▶ Stop conditions
Command name
Name of the command.
Input 25 characters
The conditions for stopping the titration are defined on this tab.
Stop time
Stops when the preset time has elapsed since the start of the titration. off
means no stop.
Range 1 ... 999999 s
Selection off
Default value off
5.6.3.7.7 BRC - Conditioning
Tab: Method ▶ BRC ▶ Properties... ▶ Conditioning
Command name
Name of the command.
Input 25 characters