Metrohm tiamo 2.1 Manual - Manual (Page 55)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.1 ￭￭￭￭￭￭￭￭ 41
Identifica-
tion Description Commands
.TC.MAX Maximum temperature coefficient
of the conductivity in %/°C MEAS TC Cond
.TC.TSTART Start temperature in °C MEAS Cond,
MEAS TC Cond
.TC.TSTOP Stop temperature in °C MEAS Cond,
MEAS TC Cond
.TITER Titer value of the solution used for
the command DET, MET, SET,
KFT, STAT,
STDADD dos,
STDADD auto,
ADD, DOS, LQH
.TOL Tolerance within which a measured
peak can be assigned to a calibra-
tion wavelength. CAL Spec
.TOU Timeout status: 1 = Timeout
expired; 0 = Timeout not
expired RECEIVE, TRANS-
FER, SCAN
.UNI Mapping unit which is defined in
the configuration for an IO port
(Text) ANALOG IN,
ANALOG OUT
.VAL Value of the command variables
(optional, i.e. Command-
name.Portname' =Command-
name.Portname.VAL') (Num-
ber). The value returned is the value
after the ending of the command. ANALOG IN,
ANALOG OUT,
DIGITAL IN, DIG-
ITAL OUT
.VAR Variance of the calculated result of
the standard addition in the selec-
ted unit STDADD
.VOL Dosed volume STDADD, ADD,
DOS, LQH
2.4.3.4 Result variables
Dialog window: Formula Editor ▶ Variables
Result variables are method-specific and are defined in the CALC command
of the method. The Variables field of the Formula editor lists all Result
variables which are available for the current method.