Metrohm tiamo 2.1 Manual - Manual (Page 47)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.1 ￭￭￭￭￭￭￭￭ 33
Identifica-
tion Description Commands
.FP{x}.DME Measured value differential for the
fixed endpoint x (1…9) MET
.FP{x}.DVT Drift for the fixed endpoint x (1…9)
in µg/min KFC, BRC
.FP{x}.ERC ERC for the fixed endpoint x (1…9) DET
.FP{x}.MEA Measured value for the fixed end-
point x (1...9) in mV DET, MET, SET,
KFT, STAT
.FP{x}.MEA Measured value for the fixed end-
point x (1...9) in the unit of the
measured value KFC, MEAS
(without T/Flow,
Conc, Ref, Spec)
.FP{x}.QTY Measured value for the fixed end-
point x (1…9) in µg KFC, BRC
.FP{x}.TEM Temperature for the fixed endpoint
x (1…9) in °C DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without T/Flow,
Conc, Ref, Spec)
.FP{x}.TIM Time in s until the fixed endpoint x
(1...9) is reached DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without T/Flow,
Conc, Ref, Spec)
.FP{x}.TRN Transmission for the fixed endpoint
x (1…9) in % MEAS Opt
FP{x}.UGE Voltage at the generator electrode
for the fixed endpoint # (1...9) in V.
In case of measurements with 756,
831: 0 = not defined, 1 = <14V,
2 = 14...28V, 3 = >28V KFC, BRC
.FP{x}.VOL Volume for the fixed endpoint x
(1…9) in mL DET, MET, SET,
KFT, STAT
.GMA Maximum gas flow rate in mL/min MEAS T/Flow
.GMI Minimum gas flow rate in mL/min MEAS T/Flow
.GMN Average gas flow rate in mL/min MEAS T/Flow
.GP.VOL Volume for Gran endpoint in mL DET, MET