Metrohm tiamo 2.1 Manual - Manual (Page 1138)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1124 ￭￭￭￭￭￭￭￭ tiamo 2.1
Command variables
The following command variables are generated in the method run by the
command REPORT and can be used in formulas under the designation
'Command name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
not ever been started
.FIN Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Com-
mand has never been ended
5.6.8.4.2 REPORT - Properties
Dialog window: Method ▶ REPORT ▶ Properties... ▶ REPORT - 'Command name'
Command name
Name of the command.
Input 25 characters
Report template
Report template
Selecting the predefined Report template which the report should be gen-
erated with.
Selection 'Report templates'
Report output
Printer
on | off (Default value: on)
The report is printed on the selected printer if this option is activated.
Selection 'Printer name' | Default printer
Default value Default printer
The report will be printed on the default printer
defined for the client.