Metrohm tiamo 2.1 Manual - Manual (Page 427)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 413
5.6.2 Track commands
5.6.2.1 Track commands - Overview
Menu item: Method ▶ Insert ▶ New track...
The following track commands exist for the different tracks:
￭ START
Start command for (see Chapter 5.5.2.1, page 403).
￭ TRACK
Start command for (see Chapter 5.5.2.2, page 404).
￭ SERIES START
Start command for (see Chapter 5.5.2.3, page 405).
￭ SERIES END
Start command for (see Chapter 5.5.2.4, page 406).
￭ EXIT
Start command for (see Chapter 5.5.2.5, page 407).
￭ ERROR
Start command for (see Chapter 5.5.2.6, page 407).
￭ END
End command for all tracks.
5.6.2.2 START
5.6.2.2.1 START - Overview
Dialog window: Method ▶ START ▶ Properties.. ▶ START 'Command name'
Start command for main track.
Appearance
The command has the following appearance:
Parameters
The parameters for the command START are configured on the following
3 tabs:
￭ General
General settings for the method run.
￭ Application note
Writing an application note which is displayed when starting a determi-
nation.
￭ Method variables
Configuring method and sample variables which are to be available for
the method.