Metrohm tiamo 2.1 Manual - Manual (Page 170)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
156 ￭￭￭￭￭￭￭￭ tiamo 2.1
Sample number
on | off (Default value: on)
Enable/disable the display of the field Sample number.
User
on | off (Default value: on)
Enable/disable the display of the field User.
Remarks
on | off (Default value: on)
Enable/disable the display of the field Remarks.
Statistics
on | off (Default value: on)
Enable/disable the display of the statistics fields.
Sample data
Note
The names defined here will be used only for the column headings in the
sample table.
The names defined in the START command under Method variables
will always be used when editing a sample line and for the determination
data.
Sample position
on | off (Default value: on)
Enable/disable the display of the column Sample position in the sample
table. The option also exists of renaming the heading of this column in the
working sample table.
Input 50 characters
Default value Sample position
ID1 … ID3
on | off (Default value: on)
Enable/disable the display of the column ID1 … ID3 in the sample table.
The option also exists of renaming the heading of this column in the working
sample table.