Metrohm tiamo 2.1 Manual - Manual (Page 1209)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.1 ￭￭￭￭￭￭￭￭ 1195
Common variables
on | off (Default value: on)
Exports configuration data for common variables (see Chapter 6.8.1, page
1280).
Rack data
on | off (Default value: on)
Exports configuration data for sample changer racks (see Chapter 6.10.1,
page 1296).
Sample solutions (TC conductivity)
on | off (Default value: on)
Exports the configuration data for calculating the temperature coefficients
of sample solutions (see Chapter 6.9.2, page 1289).
Configuration views
on | off (Default value: on)
Exports saved configuration views (see Chapter 3.1.7.1, page 87).
Workplace views
on | off (Default value: on)
Exports saved workplace views (see Chapter 3.1.7.1, page 87).
Database views
on | off (Default value: on)
Exports saved database views (see Chapter 3.1.7.1, page 87).
Result templates
on | off (Default value: on)
Exports saved result templates (see Chapter 5.6.8.2.6.1, page 1120).
Control chart templates
on | off (Default value: on)
Exports saved control card templates (see Chapter 4.4.2.1, page 234).
Curve overlay templates
on | off (Default value: on)
Exports saved curve overlay templates (see Chapter 4.4.3.1, page 238).