Rockwell Automation 2755 Decoded Hand-Held Scanner - Manual (Page 79)

Communication Setup (Cable Configuration) 4-23
Publication 2755-6.2
Advanced Features
The advanced feature options allow you to store communication
parameters for 2 separate applications. If you have already configured
the scanner, all of the communication settings are stored as Parameter 1
settings (default setting). Using the advanced feature options, you can
also create Parameter 2 settings. When using the scanner, scan the
correct parameter setting bar code for each application.
To select and/or set Parameter Set 1 configuration:
1. Configure the scanner communications as described in this chapter.
Since Parameter Set 1 is the default you do not have to scan the
Parameter Set 1 bar code.
To set Parameter Set 2 configuration:
1. Scan the PARAMETER SET 2 bar code.
2. Configure the scanner communication parameters as described in this
chapter.
To select and/or set defaults for a parameter set, scan the appropriate
default bar code. The selections are:
•
SET CABLE DEFAULTS CURRENT PARAMETER SET
•
SET CABLE DEFAULTS BOTH PARAMETER SETS