Rockwell Automation 2755 Decoded Hand-Held Scanner - Manual (Page 65)

Communication Setup (Cable Configuration) 4-9
Publication 2755-6.2
Setting IBM PC Keyboard Wedge Synapse Cable Options
The following define the communication options available when the
scanner is connected to one of the following IBM AT/XT or PS/2
keyboard wedge Synapse cables:
•
Catalog No. 2755-HFC-SP1-01
•
Catalog No. 2755-HFC-SP2-01
Defaults Settings
Scan the SET PC WEDGE SYNAPSE CABLE DEFAULTS bar code to
set the interface cable to default settings. The following table lists the
default settings.
Item Default Setting
Refer to
Description
on Page:
Programming
Guide ➀
Page Reference
Host
IBM PC/AT
IBM PS/2-50, 55SX, 60, 70,
80
4-10 4-2
Country North American 4-10 4-3
Bar Codes with
Unknown Characters
Send Bar Codes With
Unknown Characters
4-11 4-4
Intercharacter Delay 5 milliseconds 4-11 4-4
Parameter Set Parameter Set 1 4-12 4-5
➀ Bar Code Programming Guide for Decoded Scanners (Publication 2755-6.5).