I 2-0f-5 and discrete 2-of-5 options – Rockwell Automation 2755 Decoded Hand-Held Scanner User Manual

Page 51

Configuring the Scanner

3–12

Publication 2755-6.2

I 2-of-5 and Discrete 2-of-5 Options

The following options are available for Interleaved and Discrete 2 of 5
symbols:

I 2 of 5 (14 digit) to EAN 13 Conversion

When enabled, 14 character Interleaved 2 of 5 data is converted and
transmitted in an EAN 13 format.

Note: Interleaved 2 of 5 must be enabled and one code length (Length 1
or Length 2) must be set to 14. In addition, the code must have a leading
0 and a valid EAN 13 check digit.

Code Lengths

Specifies the expected length of the bar code symbol. When a specific
length is enabled, symbols that are not the specified length are ignored.
Only one or two lengths may be specified, all other lengths are ignored.

First scan the length symbol followed by the 2 digit length. Length 1
may range from 01 to 31. Length 2 may be in the range of 00 to 31.

Determine the number of characters in a symbol by counting the number
of printed digits (human readable characters).

Note: The scanner cannot be configured to read Interleaved or Discrete
2-of-5 labels of “any length”. You must specify code length(s).