Rockwell Automation 2755 Decoded Hand-Held Scanner - Manual (Page 47)

Configuring the Scanner 3–8
Publication 2755-6.2
Codabar Options
The following options are available for Codabar bar codes:
NOTIS Editing
When enabled, the scanner removes the start and stop characters from the
decoded symbol data.
CLSI Editing
When enabled, the scanner removes the start and stop characters and
inserts a space after the 1st, 5th, and 10th characters of a 14 character
Codabar Symbol.
Note: Symbol length does not include start and stop characters.
Decode Redundancy for Codabar
When enabled, a Codabar symbol must be read in both directions before
being decoded.