Rockwell Automation 2755 Decoded Hand-Held Scanner - Manual (Page 72)

Communication Setup (Cable Configuration) 4-16
Publication 2755-6.2
Setting DEC VT220 / VT320 / VT420 Keyboard Wedge
Synapse Cable Options
The following define the communication options available when the
scanner is connected to the following DEC keyboard wedge interface
cable:
•
Catalog No. 2755-HFC-SV1-01
Default Settings
Scan the SET DEC VT 220/320/420 WEDGE SYNAPSE CABLE
DEFAULTS bar code to set the interface cable to default settings. The
table below lists the defaults.
Item Default Setting
Refer to
Description
on Page:
Programming
Guide ➀
Page Reference
Host DEC VT220 / 320 4-16 6-2
Country North American 4-17 6-2
Unknown Characters
Send Bar Codes With
Unknown Characters
4-17 6-4
Intercharacter Delay 5 Millisecond 4-17 6-4
Parameter Set Parameter Set 1 4-18 6-5
➀ Bar Code Programming Guide for Decoded Scanners (Publication 2755-6.5).
Host Selection
Select the type of host the scanner will be communicating with.
The selections are:
•
DEC VT 220/320 (default)
•
DEC VT420