Rockwell Automation 1797-OE8 FLEX Ex Analog Modules User Manual - Manual (Page 99)

Publication 1797-6.5.1 - May 2005
Index
A
Alarms
1797-IE8 module
1-3
local fault
1-3, 1-6
overrange
1-3, 1-4
programming remote fault 1-6
remote fault
1-3, 1-5
underrange
1-3, 1-4
using fault mode with local fault
alarm
2-2
using fault mode with remote fault
alarm
2-2
using remote fault alarm to deter-
mine alarm levels
1-5
Analog Digital State
1797-OE8 module
2-8
Analog Fault State
1797-OE8 module
2-9
Area Classification
defining
6-2
hazard
6-2
method 6-2
temperature rating
6-2
B
Bit Descriptions
image table mapping
2-13
Bit/Word Description
4 output/4 input module
2-17
C
Calibration
5-1
1797-IE8 module
5-6
1797-OE8 module
5-8
module command words 5-2
periodic
5-1
tools
5-2
tools and equipment
5-2
Communication Fault Behavior
4-7
ControlNet Ex Adapter 2-7
ControlNet Network
1-2, 4-2, 4-4
D
Data Format
1797-IE8 module
2-4
Digital Fault State
1797-OE8 module
2-9
Drilling Dimensions
wall/panel mounting
3-8
E
Entity Parameters
1797-IE8 module
A-3
1797-OE8 module
A-11
European Union Directives
compliance to
3-2
EMC directive
3-2
Ex directive 3-2
F
Fault Mode
1797-IE8 module
2-2
enabling/disabling local fault alarm
2-2
enabling/disabling remote fault
alarm
2-2
Functional and Intrinsic Safety
Parameters
1797-IE8 module 6-4
H
High Low Error Level
1797-IE8 module 2-3
I
Idle State Behavior
4-7
Image Table Mapping
2-13
1797-IE8 bit/word descriptions
2-15
1797-IE8 module
2-14
1797-OE8 bit/word descriptions
2-17
1797-OE8 module
2-16
Input Data Behavior
upon module removal
4-8
Input Filter Cutoff
1797-IE8 module
2-3
Installation 3-4
module
3-9
Intrinsic Safety Entity Verification 6-6