Rockwell Automation 1797-OE8 FLEX Ex Analog Modules User Manual - Manual (Page 31)

Publication 1797-6.5.1 - May 2005
Understanding Configurable FLEX Ex Analog Module Features 2-15
Bit/Word Description for the Analog Input Modules
(1797-IE8 and -IE8NF)
Table 2.8 Fault Mode - Write Words 0 and 1
Table 2.9 “Add-On” Filter Selections - Write Words 0 and 1
Table 2.10 Remote Transmitter Error Up/Down - Write Words 0 and 1
Word 0 Bit 00 Fault enable for channels 0-3
Word 1 Bit 00 Fault enable for channels 4-7
Where: 0 = disabled
1 = enable with wire-off and overload or short circuit
Word Bits Description
0 07 06 05 Channels 0-3
1 07 06 05 Channels 4-7
0 0 0
Hardware filtering only (default filtering)
(1)
(1) 1797-IE8NF is reserved.
0 0 1
40Hz (25ms)
(1)
0 1 0
20Hz (50ms)
(1)
0 1 1 10Hz (100ms)
1 0 0 4Hz (250ms)
1 0 1 2Hz (500ms)
1 1 0 1Hz (1s)
1 1 1 0.5Hz (2s)
Word 0 Bit 08 Up/down channels 0-3
Word 1 Bit 08 Up/down channels 4-7
Where: 0 = remote fault is enabled by transmitter overrange
1 = remote fault is enabled by transmitter underrange