Rockwell Automation 6008-SV2R VMEbus remote I/O Scanner - Manual (Page 92)

Chapter
Operating in SVĆSuperset Mode
6
6Ć11
AUTOCONFIGURE builds the scan list by polling every possible adapter
address. Every adapter on the link that responds is placed once in the scan
list. The scanner must be in Program mode to issue this command.
confirmation not used
not used
not used
scan list
length
Byte offset
(Hex)
0202
0204
0206
-021B
021E
Name
021C
00H returned means the command was
successful. Any other value indicates
an error.
10H is both sent and returned.
16 bits per starting group
(4 words per adapter)
see Figure 6.3 and Figure 6.4
READ ONLY
Bit 7 = semaphore
not used
semaphore
0220
channel A
control/status
adapter status words
64 words
1 byte per adapter
see Figure 6.5
READ ONLY
-029F
02A0
-02BF
scan list
as many as 32 bytes
channel A
general data
number of entries in the scan list
READ ONLY
-02FF
02C0 not used
command
0203
0205 not used
021D
021F
AUTOCONFIGURE
command byte 10
description