Rockwell Automation 6008-SV2R VMEbus remote I/O Scanner - Manual (Page 127)

7 Chapter
7Ć1
Starting the Scanner
This chapter provides programming examples that illustrate the scanner
management commands.
If you want to read about: go to page:
scanner states
7Ć1
powering up the scanner 7Ć4
after waking up the scanner 7Ć8
Important: The programming examples in this publication are examples
only. They will need modification before they can run correctly in
your application. These examples were developed for a Radisys EPC
computer; they were written in Microsoft C version 7.00. To use these
examples on other VME systems, search for and replace all “EPC” calls
with the appropriate functions for your system.
The scanner operates in one of several different states, depending on what
commands you have sent the scanner, as well as the scanner’s health. The
following figure shows the possible scanner states, the inputs that result in
the states, and the states that follow a given state.
Using This Chapter
Understanding the
Scanner States