Rockwell Automation 57C620 AutoMax Programming Executive Version 3.8 - Manual (Page 247)

FĆ3 Database Definitions
For the Shark Scanner module
(M/N 57C554), the value is one (1) for an
allĆdigital rack or zero (0) for a mixed rack.
WIRE_NOTE2 NUMERIC For AutoMax Processors (M/N 57C430A,
57C431, and 57C435), the low order byte of
the AutoMax Processor tick rate (in
microseconds)
For the UDC module (B/M 57552 and
B/M 57652), the drive type for drive B
(see Parameter Record Types table for
values)
Note: Memory variables are stored in slot 99.
Database: $SWVAR.DBF and $NET.DBF
FIELD
TYPE DESCRIPTION
MAST_SLOT NUMERIC The slot in the master rack which contains
this card or which contains the remote I/O
card which is the remote I/O network
master (00Ć15)
REM_DROPNUMERIC If this card is in a remote rack, this is the
drop number for that remote rack (1Ć7);
otherwise, it is 0
SLOT NUMERIC The slot in which the variable resides
(00Ć15)
REGISTER NUMERIC The multibus register number (0Ć65535)
BIT NUMERIC The bit number within the multibus register
for boolean variables (0Ć15)
LVAR_NAME CHARACTER The variable without type specifier or array
dimensions; for network variables, this is
the local variable name
GVAR_NAME CHARACTER The variable without type specifier or array
dimensions; used for the networkĆwide
name for network variables only
NETWORK CHARACTER Network identifier; used for network
variables only (AĆZ)
DESC CHARACTER The description of this variable
ARRAY_DIM1 NUMERIC First dimension; used for memory
variables only
ARRAY_DIM2 NUMERIC Second dimension; used for memory
variables only
ARRAY_DIM3 NUMERIC Third dimension; used for memory
variables only
ARRAY_DIM4 NUMERIC Fourth dimension; used for memory
variables
DATA_TYPE NUMERIC The type of this variable:
ăă8 Floating point
ă16 ! Double integer