Rockwell Automation DeviceNet SEMINAR LAB EX - Manual (Page 37)

DeviceNet Seminar Lab Exercises 37
Publication 1787.6.1 - August 1997
10. To return operation to the original mode, click the radio button next to
Light Operate.
11. Choose
12. Choose
Important: All three lights on the photoeye should be illuminated and
the RediSTATION operator interface’s red light off. Go back to step 7 if
this is not true.
13. To exit the Device Configuration screen, choose
You return to this screen.
In summary, we have just shown you control status (on/off), diagnostics
(low margin), and configuration (light/dark operate), all from one device
over the DeviceNet network.