Rockwell Automation DeviceNet SEMINAR LAB EX - Manual (Page 33)

DeviceNet Seminar Lab Exercises 33
Publication 1787.6.1 - August 1997
You see this screen.
3. Double-click Parameter 2R.
You see this screen.
Notice that the green margin status indicator on the sensor is lit as the
reflector is correctly aligned with the sensor.
4. Choose
5. Put your hand between the reflector and the photoeye.
You will see that the setting on the software changes from On to Off.
Also notice that the red light on the RediSTATION operator interface
module goes on.