Rockwell Automation 1753-DNSI DeviceNet Safety Scanner for GuardPLC Controllers User Manual
Page 90

Publication 1753-UM002A-EN-P - July 2005
10-6 Monitor Status
000F
Permission denied. See the extended error codes on pages 10-7 to 10-8.
0010
Device state conflict occurred.
0011
Reply will not fit.
0012
Fragmentation of a primitive value. For example, the service specified an
operation that is going to fragment a primitive data value, such as half a
REAL data type.
0013
Command data is insufficient.
0014
Attribute is not supported.
0015
Too much data present.
001A
Bridge request is too large.
001B
Bridge response is too large.
001D
Attribute list is invalid.
001E
Embedded service error occurred.
001F
Connection related failure occurred. See the extended error codes on
pages 10-7 to 10-8.
0022
Invalid reply received.
0025
Key segment error occurred.
0026
Path size is invalid. Either the size of the path was not large enough, or too
much data was included.
0027
An unexpected attribute was encountered in the list.
0028
DeviceNet error, member ID is invalid.
0029
DeviceNet error, member is not settable.
00D1
The module is not in the run state.
00FB
The message port is not supported.
00FC
The message data type is unsupported.
00FD
The message is uninitialized.
00FE
The message has timed out.
00FF
A general error occurred. See the extended error codes on pages 10-7 to
10-8.
General
Status
Error Code
(00gg)
Description