Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 47)

3 • V IEWING M ODULE I NFORMATION
37
Module Identity
Under Home on the main navigation, click Module Identity in the left-hand
navigation to display the module identity information.
Module Information
This section displays the same information found on the Status page, as well as the
slot number where the module resides and its serial number.
This section displays:
„
Name - FactoryTalk Historian ME name. To change your module name, click
Advanced in the top navigation bar, then click System Settings.
„
Firmware Version - current firmware version.
„
Current Time - current time for the module. Click Advanced in the top navigation
bar, then click Time Management to configure time settings.
„
Up Time - total time past since the module was started.
„
Module Slot Location - slot location of the module in the ControlLogix chassis.
„
Serial Number - module serial number. This number cannot be changed.
For information on changing these settings, see “Working with System Settings” in the
“Administering the Module” chapter. For additional module hardware information, see
the FactoryTalk Historian ME Installation Instructions.
See “Configuring the Module Name” for details about the module name and
information about the impact of changing the module name.