Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 275)

D • RSL OGIX 5000 A DD - ON P ROFILE
265
14. To complete the download process, click [Download].
15. Click [Yes] when the download is complete to change the mode back to Remote
Run mode. The controller will execute the Ladder program.
16. Next, navigate to the Controller <name> folder to find the new tags that were
created when the module was added to the I/O Configuration. In the Controller
<name> folder, double-click on the Controller Tags folder to list the tags in the
right-hand pane.
17. In the vertical scroll bar, right-click and select Bottom.
If the tags do not display when you select Bottom, browse through the tag list to
find the Input and Output tags.
In the following sample output, the module is shown in slot 6, and its Input and
Output tags appear under the folders Local:6.I and Local:6.0. In this view you can
review the list of tags and their status.