Rockwell Automation 1747-L5xx SLC 500 Modular Hardware Style User Manual - Manual (Page 38)

Publication 1747-UM011G-EN-P - June 2008
38 Selecting Your Hardware Components
Example Worksheet for Selecting a 1746 Power Supply
If you have a multiple chassis system, make copies of the Power
Supply Worksheet found on page 230.
For a detailed list of device load currents, refer to the SLC 500 Modular
Chassis and Power Supplies Technical Data, publication 1746-TD003.
0 1 2 3
Slot
Chassis 1
Slot Numbers Description Cat. No. Power Supply at
5V dc (Amps) Power Supply at
24V dc (Amps)
0 Processor unit 1747-L511 0.090 0.000
1 Input module 1747-IV8 0.050 0.000
2 Transistor output
module
1746-OB8 0.135 0.000
3 Triac output module 1746-OA16 0.370 0.000
Peripheral device Isolated link coupler 1747-AIC 0.000 0.085
Total Current: 0.645
0.085 (1)
(1) The 1746-P1 power supply is sufficient for Chassis #1. The internal current capacity for this power supply is 2 A at 5V dc,
0.46 A at 24V dc.
?
0 1 2 3 4 5 6
Slot
Chassis 2
Slot Numbers Description Cat. No. Power Supply at
5V dc (Amps) Power Supply at
24V dc (Amps)
0 Processor unit 1747-L514 0.090 0.000
1 Output module 1746-OW16 0.170 0.180
2 Combination module 1746-IO12 0.090 0.070
3, 4, 5, 6 Analog output
modules
1746-NO4I 0.220
(4 x 0.055)
0.780
(4 x 0.195)
Peripheral device Isolated link coupler 1747-AIC 0.000 0.085
Peripheral device Interface converter 1746-PIC Not applicable Not applicable
Total Current: 0.570
1.115
(1)
(1) The 1746-P4 power supply is sufficient for Chassis #2. The internal current capacity for this power supply is 10 A at 5V dc,
2.88 A at 24V dc; not to exceed 70 W.
TIP
Consider future system expansion when selecting a power
supply.