Rockwell Automation 1747-L5xx SLC 500 Modular Hardware Style User Manual User Manual
Page 293
Publication 1747-UM011G-EN-P - June 2008
Index 293
read
related documentation
relay
relay logic
relays, surge suppressors for
REM, keyswitch position for the SLC 5/03,
SLC 5/04, and SLC 5/05
processors
remote I/O capacity, processor
specification
remote I/O network
remote I/O passthru
removable terminal blocks (RTB)
installing
removing
using
removing power from the SLC 500 control
system
replacement hardware
cables and connectors
other items
terminal blocks
replacing a fuse on the power supply
required tools and equipment
reserved bit
restore
retainer clips
replacement kit
replacing on modules
retentive data
RS-232 communication
connectors
DCE pinout
DF1 protocol
DTE pinout
SLC 500 devices that support
RS-232 connector pin assignments
1746-BAS module
to a modem
to DTE
1747-KE module
to a modem
to DTE
2760-RB module
to a modem
to DTE
IBM AT to an SLC 5/03 processor
PC to a modem
PLC-5 processor
to a modem
to DTE
SLC 5/03 processor
to a modem
to a PC (with cable 1747-CP3)
to DTE
RS-232 devices
1746-BAS module
1747-KE module
RS-232, definition
RTB
RTS (Request to Send)
run mode
RUN, keyswitch position for SLC 5/03,
SLC 5/04, and SLC 5/05
processors
rung
S
safety considerations
disconnecting main power
master control relay circuits, periodic
tests of
power distribution
safety circuits
save
SCADA applications
scan
scan time
selecting
contact protection
discrete I/O modules
enclosures
isolation transformers
memory modules for SLC 5/03, SLC 5/04,
and SLC 5/05 processors
power supply
processors
SLC 5/01 and SLC 5/02 memory modules
speciality I/O modules
surge suppressors
sinking
sinking and sourcing
contact output circuits
sinking device with sourcing input
module circuit
sinking device with sourcing output
module circuit
solidstate DC I/O circuits
sourcing device with sinking input
module
sourcing device with sinking output
module circuit