Rockwell Automation 1395 ControlNet Communication Board - Manual (Page 81)

8–9 Reference
Publication 1395.5.37 – March, 1999
Parameter 407 – [A>CntlNet In 7]
Parameter 307 – [B>CntlNet In 7]
Use: ControlNet Input word #7
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value: (Link Dependent)
Maximum Value: (Link Dependent)
Default Value: None
Description: This parameter is a fast source that contains the eighth
word or group of data from the PLC controller output image table.
The value can be used by the CNA board directly or by other Drive
functions through a configuration link.
Parameter 450 – [A>CntlNet Out 0]
Parameter 350 – [B>CntlNet Out 0]
Use: ControlNet Output word #0
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value: (Link Dependent)
Maximum Value: (Link Dependent)
Default Value: None
Description: This parameter is a fast sink that provides the first word
or group of data to the PLC controller input image table. The value
can be provided by the CNA board directly or by other Drive
functions through a configuration link.