Rockwell Automation 1395 ControlNet Communication Board - Manual (Page 75)

8–3 Reference
Publication 1395.5.37 – March, 1999
The column headings in Table 8.B are defined as follows:
DEC – The parameter number in decimal format.
HEX – The parameter number in hexidecimal format.
NAME – The parameter name as it appears on a program
terminal.
UNITS – Indicates the engineering units used to display a
parameter value when viewed on a program terminal.
INIT – The default parameter value stored in the Drive. The
default values replace present values when a System
Initialize command is given to the Drive.
MIN – The minimum allowable value for a parameter. If no
minimum value is given, the parameter has not been
assigned a minimum limit.
MAX – The maximum allowable value for a parameter. If no
maximum value is given, the parameter has not been
assigned a maximum limit.
EE – Indicates whether the parameter value is backed up in
Drive EEPROM memory. In general, only setup
parameter values are stored in EEPROM memory.
FUNCTION – Indicates the parameter type. The parameter type
determines how the parameter is treated by the Drive
and what type of information is contained within the
parameter.
PORT – All Adapter board parameter numbers are determined
by the Drive Adapter Port that the board is mounted in.
When moving an Adapter board from one port to
another, the functionality of the board remains the
same, but specific functions will change.