Rockwell Automation 284E ArmorStart EtherNet IP Communications and Control Programming Manual - Manual (Page 80)

80 Rockwell Automation Publication 280E-PM001A-EN-P – August 2011
Appendix B ArmorStart ® EtherNet/IP ™ Communications & Control Programming Manual
4. Click in the administrative settings folder to expand it and the following is
displayed:
5. Click in the Network Configuration tab and a prompt to enter a User
Name and a Password is displayed. Enter the pre-set User Name and
Password
or if they have not been set up previously, use the default User
Name and Password. The default User Name is Administrator and there is
no password set by default.