Barco ID LR-6 R9010342 - Manual (Page 129)

Glossary
GLOSSARY
AGC
Automatic Gain Control: allows an automatic amplitude (gain) control of the incoming video signal
CEE7/7
European power plug to connect the power cord to the wall outlet.
Component Video
In Component Video the term component describes a number of elements that are needed to make up the video picture, these
components are PR/Y/PB. A composite video signal on the other hand contains all the information needed for the color picture in a
single channel of information
DVI
Digital Visual Interface is a display interface developed in response to the proliferation of digital flat panel displays.
The digital video connectivity standard that was developed by DDWG (Digital Display Work Group). This connection standard offers
two different connectors: one with 24 pins that handles digital video signals only, and one with 29 pins that handles both digital
and analog video. This standard uses TMDS (Transition Minimized Differential Signal) from Silicon Image and DDC (Display Data
Channel) from VESA (Video Electronics Standards Association).
DVI can be single or dual link.
NEMA5
American power plug to connect the power cord to the wall outlet.
On-Axis projection
Projection where the projector is positioned so as to have the centre of the lens coinciding with the centre of the screen.
PiP
PiP stands for "Picture in Picture" and allows to display multiple windows containing each of them an image. The windows may be
of the video or data type.
Reality(SXGA+)
Native resolution of the LCD panels = 1400 x 1050 pixels (4:3)
SDI
Serial Digital Interface
R59770134 ID LR-6 27/05/2011 125