Barco ID LR-6 R9010342 - Manual (Page 123)

9. Maintenance
Image 9-5
Input filter removal
Image 9-6
Input filter removed
4. Clean the dust filter with a dry cloth.
5. Re-insert the dust filter by sliding it back in the filter housing.
If the airflow is falling under a predetermined treshold value a warning will be displayed on the screen.
Image 9-7
At that time it is strongly recommended to replace or clean the dustfilter under the X-cube. Failing to do so,
will strongly reduce the lifetime of the LCD’s and the analyzers.
The manufacturer reserves itself the right to refuse warranty repair if the projector was working with dirty
dustfilters.
R59770134 ID LR-6 27/05/2011 119