Barco ID LR-6 R9010342 - Manual (Page 124)

9. Maintenance
9.3 The UHP Lamp
9.3.1 Reset lamp runtime
9.3.1.1 Reset runtime
When to reset the lamp runtime ?
The lamp runtime should only be reset when placing a new lamp.
W ARNING : Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
technician.
How to reset the lamp runtime in the iQ/iD ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset
Image 9-8
7. Press ENTER
A dialog box is displayed
Image 9-9
8. Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
W ARNING : Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
technician.
120 R59770134 ID LR-6 27/05/2011