Lenze E84AYCET EtherCAT MCI module - Manual (Page 10)

2 Safety instructions
2.1 General safety and application notes
10
Lenze · E84AYCET communication module (EtherCAT) · Communication Manual · DMS 5.0 EN · 05/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2 Safety instructions
2.1 General safety and application notes
Lenze drive and automation components ...
• shall only be used as directed.
Application as directed ( 12)
• must never be commissioned if they display any signs of damage.
• must never be technically modified.
• must never be commissioned if they are not fully mounted.
• must never be operated without the covers required.
• during and after operation can have live, moving and rotating parts, depending on their degree
of protection. Surfaces can be hot.
For Lenze drive components ...
• only use the accessories approved.
• only use genuine spare parts supplied by the manufacturer of the product.
Observe all specifications contained in the enclosed documentation and related documentation.
• This is the precondition for a safe and trouble-free operation and for obtaining the product fea-
tures specified.
Product features ( 13)
• The specifications, processes, and circuitry described in this document are for guidance only and
must be adapted to your own specific application. Lenze does not take responsibility for the
suitability of the process and circuit proposals.
All works on and with Lenze drive and automation components must only be carried out by qualified
personnel. According to IEC 60364 or CENELEC HD 384 these are persons who ...
• who are familiar with the installation, assembly, commissioning and operation of the product.
• who have the corresponding qualifications for their work.
• who know all regulations for the prevention of accidents, directives and laws applicable on site
and are able to apply them.

Note!
Always observe the specified safety measures to avoid severe injury to persons and
damage to property!
Always keep this documentation to hand in the vicinity of the product during operation.

Danger!
If you ignore the following basic safety measures, severe injury to persons and damage
to material assets may result.