Leica Biosystems TP1020 - Manual (Page 85)

85 Leica TP1020
13. Optional Accessories
Basket holder for second tissue basket (continued)
Installing the second basket holder
• Rotate the carousel cover counterclockwise until it can be removed from
the axle (3) in an upward movement.
The second basket holder is installed at position 2. For this purpose, the
existing cover and bar must be removed.
• Clutch the rod (5) with a pair of tongs and release the slotted screw (8a)
on the upper side of the disc (4).
• Insert the rod (5) of the second basket holder in the bore on the bottom
of the disc (4). Adjust the holding device (6) for the second basket in the
same way as the holding device in position 1 and hold it in that position.
• Put the locking washer (7) around the bore in disc (4).
• Insert the Allen screw (8b) into the bore from above and tighten with an
Allen key no. 3.
• Insert the hub (2) of the carousel cover (1) from above into the axle (3) of
the center piece.
• To secure hold on to the disc (4) and rotate the carousel cover clock-
wise.
Fig. 29
4
8a/8b 7
5
6