Leica Biosystems TP1020 - Manual (Page 32)

32 Instructions for Use V 2.9 RevC, English – 12/2013
4. Initial Operation
4.3.3 Connecting the power cable
2
3
230
Fig. 16
• Before connecting the power cable, check if
the power switch (2) at the rear of the instru-
ment is disconnected ("O").
• Out of the selection of cables, select the one
with the plug that fits into your laboratory's
wall outlets.
• Connect the power cable to the corresponding
socket (8) at the rear of the instrument and plug
the power cable into the wall outlet.
The instrument is ready to be switched on.
The instrument is supplied together with various country-specific power cables.
The instrument may only be connected to the power with the cable supplied together with the
instrument and it may only be connected to grounded sockets.