Leica Biosystems TP1020 - Manual (Page 27)

27 Leica TP1020
4. Instrument Setup
• Remove the wooden ledge (8) sideways from the
interior box (9).
• Remove the interior box (9) in an upward move-
ment.
• To lift up the instrument (using 2 persons), take it
by the reagent container platform or by the lower
end of the housing (see Fig. 10b,"" "" below) and
lift it from the base plate (10).
• Install the instrument on a stable laboratory bench.
Four rollers (11) under the instrument housing
permit rotating the instrument on the bench.
• Remove the sponge rubber transport safety device
(12) from under the carousel cover (13).
• Depending on the instrument version, 4 foam
transport anchors (14) may have to be removed
between the Plexiglas plates (15).
8
9
10



13
12
14
15
11 (not visible)
 
Fig. 10b


When transporting the instrument, do NOT
lift it up by the carousel cover!
For safe transport of the instrument, we rec-
ommend keeping the original packaging.