Leica Biosystems TP1020 - Manual (Page 47)

47 Leica TP1020
6. Programming the Instrument
6.2.6 Selecting infiltration times per station
• Press ARROW RIGHT to move the cursor to
the next entry position.
The cursor blinks at the hour entry digits.
• Press PLUS or MINUS respectively to enter
the hours.
• Press ARROW RIGHT to move the cursor to
the next entry position.
The cursor flashes on both digits destined for
entering the minutes.
• Press PLUS or MINUS to enter the minutes.
Setting range: 0 hrs. 05 min. to 99 hrs. 59 min.
Press ARROW RIGHT to quickly jump to the
next station for entering the desired parameters
(vacuum and infiltration time). Press PLUS/MINUS
to enter the desired parameters.
For stations you wish to leave out of
your program, select an infiltration
time of 0 h 00 min.
In two-basket programs infiltration
time is the same for all stations!