Leica Biosystems TP1020 - Manual (Page 60)

60 Instructions for Use V 2.9 RevC, English – 12/2013
Delayed start (continued) • Press PLUS / MINUS to enter the number of
days.
• Press ARROW to move the cursor to the data
entry position for the hours.
• Press PLUS / MINUS to enter the number of
hours.
• To move the cursor to the digits destined for
entering the minutes, push the ARROW key.
• Press PLUS / MINUS to enter the number of
minutes.
The program shown here would be started the
next day at 7.30 PM.
• To activate the delay function press START.
Once the delay function has been activated,
the tissue basket will move immediately to the
selected starting container.
While the basket is waiting in the starting con-
tainer for the actual program to start, the display
reads "- -h - -".
When pressing CLOCK the display switches from
real time indication to reading the selected start-
ing time and the resulting end time.
Display end of processing time
To check if the programmed starting time leads
to an acceptable end of run time:
• Press "CLOCK".
In the example shown here the end of processing
would be the day after next at 9.48 AM.
9. Operating the Instrument in the Automatic Processing Mode
0 1 - - h - -
P 4 1 6 : 3 0