Leica Biosystems TP1020 - Manual (Page 26)

26 Instructions for Use V 2.9 RevC, English – 12/2013
4. Initial Operation
4.1 Unpacking instructions
Fig. 10
• To remove the metal strips (1), you need metal
shears and suitable gloves. Stand next to the
crate and cut the strips at the location shown (see
Fig 10a "" above).
• Lift the lid (2) off of the crate.
• Remove the Instructions for Use (3) and packing
list.
• Remove all accessories (4) from the compartments
of the cardboard grid (5).
• When all parts have been removed, lift them up-
wards and out and remove the intermediate bottom
(6) underneath.
• Lift the outer carton ring (7) upwards and out.


1
2
3
4
4
4
4
5
6
7
Fig. 10a
Caution when removing the metal strips!
There is a risk of injury when opening them
(the strip has sharp edges and is under
tension)!
When the instrument arrives, check the tilt indicator ( Fig. 10 ) on the package. If the
arrowhead is blue, the shipment was transported laying flat, was tilted at too great
an angle or fell over during transport.
Note this on the shipping documents and check the shipment for possible damage.
If obviously there is damage, please contact your freight forwarder immediately.