JUMO 706560 LOGOSCREEN es Operating Manual - Manual (Page 87)

87
4 Configuration parameters
Configuration ➔ Report/Batches
External texts
(logic inputs) Configuration
➔ Control functions
➔ External texts
➔ Logic input
1 — 7/External
input 1 — 6
Standard text,
Text 1 — 146,
No text
v Chapter 3.5 “Event list /
AT”
v Configuration ➔ Texts,
page 91
Key inhibit Configuration
➔ Control functions
➔ Key inhibit
Off,
LogInp.1 — 7,
Alarm Gr.1 — 6,
Combination alarm,
Logged in,
Error,
Modbus flag
Ext. Inp. 1 — 6,
CF inserted
CF stolen
Int. mem. al./CF,
Int. mem. al./ser,
Mem. al./CF card The keys are inhibited as
soon as the selected logic
input is closed.
Time
synchronization Configuration
➔ Device data
➔ Date and time
➔ Time
synchroniz.
Off,
LogInp.1 — 7,
Alarm Gr.1 — 6,
Combination alarm,
Logged in,
Error,
Modbus flag
Ext. Inp. 1 — 6,
CF inserted
CF stolen
Int. mem. al./CF,
Int. mem. al./ser,
Mem. al./CF card Using this parameter or
this function, the system
clocks of several recorders
can be synchronized
simultaneously.
When a logic input has
been selected and is
operated (transition from
“Low” to “High”), then the
time can be synchronized.
The seconds are decisive
in the time change. They
are used for rounding the
time up or down. Example:
12:55:29 -> 12:55:00
12:55:30 -> 12:56:00
Parameter Value/selection Description
Parameter Value/selection Description
Periodic report Configuration
➔ Report/Batches
➔ Periodic report
Off,
On If a report is Off, it cannot
be called up. It will be
skipped automatically
when switching reports.
External report/
Batches Configuration
➔ Report/Batches
➔ Ext. report/Batches
➔ Status
Off,
Only Ext. rep.,
E.R.+batches Activates the external
report and the batch
report, if required.
v Chapter 3.2.8 “Batch
reports”