JUMO 706560 LOGOSCREEN es Operating Manual - Manual (Page 40)

3 Operation and visualization
40
The example above shows the search for the first occurrence of a
measurement >50 on channel 1 on the 15.07.04 within the period from
15:50:59 to 16:20:26.
Search result Two results are possible:
- no (further) value was found
(display: “no value found”)
- a value which fulfils the search criteria was found
“no value
found” If no (further) value was found, the text “no value found” is shown in the cursor
position field.
Value found If a (further) value was found, the measurement representation is shifted in
such a way as to display the value that was found in the center of the
displayed range. The cursor (violet line) is positioned there.
Continue
search If a (further) value was found which meets the search criteria, the softkey can
be used to search for further values until no further value is found.
Window for defining the search criteria
Start search
Position of the value found
or
“no value found” display
Current zoom