JUMO 706560 LOGOSCREEN es Operating Manual - Manual (Page 112)

5 Setup software
112
Create
screenshot This function (also known as “print screen”) is another option which is
available for documenting settings or events.
Start the function and operate the “Create” button. A screenshot (print-out) will
be created for the device that is connected. You can save the screenshot as a
bitmap, or print it out directly.
Date and
time This function is used to match the date and time for a PC and a device.
The new setting of the date and time of a device is made with the
or button. Both functions use the entries
under “New setting” as the basis for making the setting.
The function sets the date and time of a device.
The function only sets the time. If there is a deviation of
more than 30 seconds, the function will not be performed.
ensures that the device clock is read out permanently
(cyclically). Permanent read-out must be terminated through . The
device clock cannot be set during permanent read-out.
Event counter This function can be used to read out the two internal and the two external
counters of the paperless recorder and set them to a specific value.
After starting up the function, a connection is made to a device and the current
count is displayed. You can now alter the individual counts. If you click
, the new counts will be adopted by the device.
Transmit date and time to device.
Closes the function
Synchronize device time
with PC time