JUMO 706560 LOGOSCREEN es Operating Manual - Manual (Page 76)

4 Configuration parameters
76
Time zone
(GMT dev.) Configuration
➔ Device data
➔ Time zone (GMT dev.)
-720 to 60 to +720 min Enter here the deviation of
your time zone from GMT
(Greewich Mean Time).
For Germany, these are 60
min (= 1h). The summer
time must not be taken into
account.
Language Configuration
➔ Device data
➔ Language
German, English, French,
Dutch, Spanish, Italian,
Hungarian, Czech,
Swedish, Polish, Danish,
Finnish, Portuguese,
Russian Select the language for
displaying the device texts.
Supply frequency Configuration
➔ Device data
➔ Supply frequency
50, 60Hz
Temperature unit Configuration
➔ Device data
➔ Temperature unit
°C, °F
Int.mem./
ser. read-out
(memory alarm) Configuration
➔ Device data
➔ Memory alarm
➔ Int.mem./
ser. read-out
0 to 1 to 256 MB Limit for the available
memory with respect to
reading out data via the
interface.
v See “Digital signals” on
page 17.
Int.mem./read-out
via CF
(memory alarm) Configuration
➔ Device data
➔ Memory alarm
➔ Int.mem./
read-out via CF
0 to 1 to 256 MB Limit for the available
memory with respect to
reading out data via the
CompactFlash memory
card.
v See “Digital signals” on
page 17.
CF card (external)
(memory alarm) Configuration
➔ Device data
➔ Memory alarm
➔CF card (external)
0 — 256 MB Limit for the available
memory of the external
CompactFlash memory
card.
v See “Digital signals” on
page 17.
Factory setting Configuration
➔ Device data
➔ Enter defaults
No,
Yes Yes = accept factory
setting.
The parameter
automatically returns to
“No” after acceptance.
Parameter Value/selection Description