JUMO 706560 LOGOSCREEN es Operating Manual - Manual (Page 106)

5 Setup software
106
TCP/IP PORT The following parameters must be selected.
Analog
modem /
ISDN The following parameters must be selected.
IP address /
HOST name xxx.xxx.xxx.xxx
(Example: 192.168.0.10) Enter the IP address of
your device. If you enter
the name, the IP
address can be
determined by clicking
on the button “Convert
HOST name to IP
address”.
Port number,
port name 502 The port used for
communication.
Communication
protocol Modbus TCP/IP,
Modbus protocol Modbus TCP/IP must
be set here.
Telephone number Enter the telephone
number for the required
device.
Connect via Select the modem that
is to be used to make
the connection.
Communication
protocol Modbus TCP/IP,
Modbus protocol Modbus protocol
must be set here.
Device address 1 — 255 Device address for the
Modbus protocol.