JUMO 706560 LOGOSCREEN es Operating Manual - Manual (Page 110)

5 Setup software
110
5.8 Menu functions
5.8.1 File
New Opens a new setup in the working area. The values will be preset to the factory
default settings.
Open Opens an existing setup from a file, and present the contents in the working
area.
Save Save the setup that is shown in the working area to a file. It is only necessary
to enter the file name once. If the file is saved again, no query is made about
the file name.
Save as Save the setup that is shown in the working area to a file. Unlike the Save
function, this always asks for a file name.
Close Removes a complete setup from the working area. If changes have not yet
been saved, this can still be done immediately after calling up the Close
function.
Delete Deletes a file from a hard disk or another type of data storage medium.
Export as
RTF text The entire current configuration is saved as an RTF file. The RTF file can be
opened by most word processing programs.
Print When you have called up the function, the selection of what is to be printed
appears first. Printing starts when the selection has been concluded.
Print preview The printed result is displayed on the screen. You can let several pages be
displayed, and alter the size of the pages on the screen.
Printer
setup Here you can make alterations to the settings for your printer. When the
program is started, the standard printer for Windows will always be set as the
active printer.
Default settings Here you can make alterations to the default settings for the program. The
alterations will only take effect after a fresh start of the setup software.
Exit This closes down the setup software.
A
Deleted files cannot be recovered !