JUMO 706560 LOGOSCREEN es Operating Manual - Manual (Page 60)

3 Operation and visualization
60
Standard texts The recorder offers standard texts as listed in the following table:
Freely definable
texts 146 texts belonging to the group of standard texts can be freely defined, up to
a length of 20 characters.
Supplementary
text The recorder automatically supplements the texts by “ON” or “OFF” in order to
distinguish between the appearance and disappearance of the signal.
Example:
Interface text A text of up to 20 characters length can be entered in the event list via the
serial interface. For further information, please refer to the Interface
Description B 70.6560.2.0
Standard text Comment
Gr x Chany low alarm ON
Gr x Chany low alarm OFF
Gr x Chany high alarm ON
Gr x Chany high alarm OFF
Logic input x ON
Logic input x OFF
Ext. input x ON
Ext. input x OFF
x = group number
y = channel number
Power ON
Power OFF
Data lost
Summer time start
Summer time end
New configuration
Counter 1: + xxxxx
Counter 2: + xxxxx
5 digits plus sign,
no decimal point
Standard text Comment
“Text 1 — 146”
In the case of logic signals and alarms,
the supplementary text “ON” or “OFF” is
added automatically, on counters the
current count is added.
146 freely definable texts
with 20 characters each
Standard text Supplementary text Entry in event list
Logic input 2 ON Logic input 2 ON
Logic input 2 OFF Logic input 2 OFF