JUMO 706560 LOGOSCREEN es Operating Manual - Manual (Page 80)

4 Configuration parameters
80
Configuration ➔ Digital signal name
Unit
(external
analog inputs and
counters) Configuration
➔ Analog inputs
➔ External input
1 — 36
External counter 1—2
➔ Addit’l parameters
➔ Unit
5 characters
%
v Chapter 3.8 “Text entry”
Decimal place
(external
analog inputs and
counters) Configuration
➔ Analog inputs
➔ External input
1 — 36
External counter 1—2
➔ Addit’l parameters
➔ Decimal place
Automatic,
X.XXXX,
XX.XXX,
XXX.XX,
XXXX.X
(for analog inputs),
XXXXX. (for counters)
Automatic: representation
with maximum resolution
Integrator
time base
(external
analog inputs) Configuration
➔ Analog inputs
➔ External input
1 — 36
➔ Addit’l parameters
➔ Integr.
time base
Off,
Second,
Minute,
Hour,
Day Time base for the
integrator. If the time base
is switched off, the
integrator indication is
suppressed in the report.
v Chapter 2.6 “Integrator”
Integrator unit
(external
analog inputs) Configuration
➔ Analog inputs
➔ External input
1 — 36
➔ Addit’l parameters
➔ Integr. unit
5 characters v Chapter 2.6 “Integrator”
Parameter Value/selection Description
Parameter Value/selection Description
Digital signal name Configuration
➔ Digital signal name
➔ Logic input 1 — 7
➔ Alarm group 1 — 6
➔ Combination alarm
➔ Logged in
➔ Error
➔ Modbus flag
➔ External input
1 — 6
➔ CF card inserted
➔ CF card stolen
➔ Int. mem. al./via CF
➔ Int. mem. al./serial
➔ Memory alarm CF
card
7 characters
LogInp 1 — 7
Al.Gr.1 — 6
Alarm
Logged in
Error
MB flag
ExtInp1 — 6
CF card
CF card
Mem. al.
Mem. al.
Mem. al.
v Chapter 3.8 “Text entry”