JUMO 706560 LOGOSCREEN es Operating Manual - Manual (Page 24)

2 Instrument description
24
Optimization of
recording
duration The recording duration can be optimized by process-oriented selection of the
storage cycle.
In normal operation (no error, no alarm, ...) a storage cycle that is as long as
possible (e.g. 60sec, 180sec, …) should be selected, depending on the
particular application.
In the event of an alarm or error, the storage cycle can be shortened via event
operation, with the effect that the measurement data are recorded with a high
time resolution.
2.9 Reading out data
In addition to automatic read-out via the external CompactFlash memory card,
measurement data can also be read out through the serial interface or the
Ethernet interface.
Both read-out options (card/interface) work in parallel. For this reason, there
are also two “digital signals”, which indicate when the available storage space
has fallen below a certain configurable value.
Memory alarm The following limits can be configured at the configuration level:
Configuration ➔ Device data ➔ Memory alarm ➔ Int.mem./ser.read-out
Configuration ➔ Device data ➔ Memory alarm ➔ Int.mem./read-out via CF
Configuration ➔ Device data ➔ Memory alarm ➔ CF card (external)
The parameter Parameterization ➔ Memory display can be used to determine
which storage space display is shown in the status line.
For further information, please refer to:
v Chapter 2.8 “Storing data”
Chapter 2.4 “Digital signals”
Chapter 3.3 “Parameterization” (page 56)
Chapter 4 “Configuration parameters” (page 73 and page 76)
Read-out via
interface Please use the PC software PCC to read out measurement data via the serial
or the Ethernet interface. The software has been developed especially for the
paperless recorder.
v Please refer to the Operating Manual B 70.9702.0. for further information.
2.10 Evaluating data
Please use the PC Evaluation Software (PCA3000) for evaluating the data on
the PC. The software has been developed especially for the paperless
recorder.
v Please refer to the Operating Manual B 70.9701.0. for further information.